Low Pressure Switch for RO

Explore Low Pressure Switch 6mm in Bangladesh:

The Low-Pressure switch is located at the supply water side of the Booster Pump and it will turn OFF the pump in case of water is stop coming from the main supply or of the pressure is very low for the functioning of the RO.

Our Low Pressure Switch is made of Polypropylene,It adopts Push to connect technology, which allows users to connect and disconnect quick and easy without the need of any other tools.It fits standard 1/4 inch OD plastic RO tubing, Copper, CPVC, PEX and PVC pipe or hose.

Where to use it?

Applications include RODI system,Irrigation System, refrigerator ice maker tubing, coffee machine etc.Low pressure switch for RO Booster pump(ON-FF) operation. Low pressure Switch job is to shut off the booster pump when your water filters are blocked or there is no enough feeding water to pass through the pump and avoid any burring possibility to your booster pump motor

It’s made only Food grade and unbreakable plastic, and quality material inside, which is long-lasting and smoothly work. A low-Pressure switch increases the life of your RO Pump, safety from dry running RO membrane. It’s Compatible with all types of RO water purifiers like Avipure, Kent, Aquaguard, Aquasafe, Aqua grand, etc. The Low-Pressure switch is located at the supply water side of the Booster Pump and it will turn OFF the pump in case of water is stop coming from the main supply or of the pressure is very low for the functioning of the RO.

Low pressure switch for reverse osmosis booster pump (ON-OFF) operation control It works to shut off the booster pump when your water filters are blocked or there is no enough feeding water to pass through the pump and avoid any burring Fit for your booster pump motor Application method: Take down the blue button, cut flat the 1/4″ tube and insert it then turn back the button When take out the tube, you should first take out the button, next put the tube inside and use hands to withstand the mouth, then the tube can pull out easily

WATER&FOOD USE MATERIALS: Our RO Pressure Switch is made from safe,non-toxic materials.They are widely used for RODI system,plumbing or drip irrigation System etc

the switch activates at 36.25 psi keeping the pressure in the RO tank at that setting by turning on the booster pump when pressure falls below the target 36.25 psi and turning off the booster pump when the pressure reaches 36.25psi. it is for 12VDC OR 24vdc.

Performances: 

• The water pressure entering the RO membrane is monitored to ensure its stability.
• If the pressure drops below a predetermined minimum, the LPS will automatically trigger a safety feature.
• This feature will stop the RO pump in order to protect the membrane from potential damage caused by low pressure.

Understanding Low Pressure Causes:

1. Insufficient water supply.
2. Blocked filters or membranes before treatment.
3. Malfunctioning pump.
4. Leaks throughout the system.